Product Name: Stanozolol
Synonyms: 17β-hydroxy-17α-methyl-5α-androstano[3,2-c]pyrazol-19-one
CAS Number: 10418-03-8
Molecular Formula: C21H32N2O
Molecular Weight: 328.49 g/mol
Intended Use: Pharmaceutical, veterinary applications
Supplier: Ask contact details for local supplier
Emergency Contact: Refer to local emergency response numbers and poison control center
Classification: Harmful if swallowed, irritant to eyes and skin, may cause allergic skin reactions,
Signal Word: Warning
Hazard Statements: Harmful in contact with skin or if inhaled, may cause respiratory irritation, possible reproductive toxicity, may alter liver function with prolonged exposure
Precautionary Statements: Avoid inhalation, prevent contact with eyes or skin, do not eat or drink while handling, wear suitable protective equipment at all times
Routes of Exposure: Inhalation, ingestion, dermal
Target Organs: Liver, endocrine system, reproductive organs
Potential Health Effects: Nausea, fatigue, mood changes, long-term use can impact liver health and hormonal balance
Chemical Name: Stanozolol
Purity: Typically ≥98%
Impurities: Unknown or not specified for pharmaceutical grade
Additives: None for pure chemical powder
Physical State: Solid, crystalline powder
Color: White to off-white
Inhalation: Remove person to fresh air immediately, monitor for respiratory distress, seek medical advice if symptoms persist
Skin Contact: Rinse skin thoroughly with plenty of water and soap, remove contaminated clothing, call a physician for significant reaction or rash
Eye Contact: Flush eyes with running water for at least 15 minutes, hold eyelids open, get medical help for irritation
Ingestion: Rinse mouth, do not induce vomiting, seek medical attention right away, provide details of substance ingested
Notes for Doctors: Treat symptomatically, monitor liver and kidney function, consider possible effects on endocrine system
Suitable Extinguishing Media: Use water spray, dry chemical, foam, or carbon dioxide extinguishers, avoid direct water jet on burning powder
Specific Hazards: Toxic fumes including nitrogen oxides, carbon monoxide, and carbon dioxide may form under fire conditions
Protective Equipment for Firefighters: Self-contained breathing apparatus, full protective gear, ensure proper ventilation
Fire Fighting Instructions: Evacuate area, avoid inhaling fumes, fight fire from safe distance, prevent run-off from entering drains
Personal Precautions: Wear gloves, goggles, laboratory coat, and dust mask or respirator
Environmental Precautions: Prevent further leakage or spillage, avoid discharge into the environment, contain spill using inert absorbent
Methods for Cleaning Up: Carefully sweep up without generating dust, collect in appropriate container for disposal, ventilate area thoroughly, use damp cloth for final clean-up, wash contaminated surfaces with soap and water
Disposal: Transfer waste for safe disposal following local regulations
Handling: Handle inside a chemical fume hood or well-ventilated area, avoid dust formation, keep away from incompatible materials, wash hands after working, keep away from food and beverages
Storage Conditions: Store locked up, keep container tightly closed, maintain in a cool, dry, dark location, prevent exposure to moisture and direct sunlight
Incompatibilities: Strong oxidizers, strong acids, avoid contact with reactive chemicals
Packaging Material: Use original packaging or chemically resistant containers
Special Precautions: Label all containers clearly, limit access to trained personnel
Exposure Limits: Not established specifically for stanozolol, general pharmaceutical lab standards apply
Engineering Controls: Use adequate general and local exhaust ventilation
Personal Protective Equipment: Nitrile or latex gloves, lab coat, chemical safety goggles, dust mask or respirator suitable for fine powders
Hygiene Measures: No eating, drinking or smoking at workspace, wash hands thoroughly after handling, remove contaminated clothing and wash before reuse
Environmental Controls: Prevent powder release or disposal in sewers, control air emissions for lab environments
Appearance: White or off-white crystalline powder
Odor: Odorless
Odor Threshold: Not applicable
pH: Not available
Melting Point: 229 – 242°C
Boiling Point: Not available
Flash Point: Not available
Solubility: Practically insoluble in water, slightly soluble in alcohol, soluble in acetone and chloroform
Partition Coefficient (Log Kow): 2.6 (estimate)
Vapor Pressure: Negligible at room temperature
Evaporation Rate: Not available
Relative Density: About 1.11 g/cm³
Other data: Stable under recommended storage conditions
Chemical Stability: Stable under normal laboratory and storage conditions
Conditions to Avoid: High temperature, direct sunlight, moisture, strong oxidizers
Incompatible Materials: Strong acids, bases, oxidizing agents
Hazardous Decomposition Products: Nitrogen oxides, carbon oxides, various degraded products in case of fire
Polymerization: Will not occur under normal conditions
Routes of Exposure: Inhalation, ingestion, skin or eye contact
Acute Toxicity: Data limited; overdose or misuse can cause serious health impacts including liver toxicity, cardiovascular strain, hormonal imbalance
Effects on Skin: May cause irritation, allergic reaction possible
Effects on Eyes: Irritation, redness, watering possible
Respiratory Effects: Cough, irritation if inhaled
Ingestion Risks: Gastrointestinal upset, potential liver stress, hormonal effects
Chronic Effects: Liver damage, altered cholesterol, reproductive impact, possible carcinogen in long-term animal studies, not classed as carcinogenic in humans due to lack of data
Sensitization: Possible with repeated exposure
Reproductive Toxicity: Disruption to sex hormones, birth defects possible through misuse during pregnancy
Ecotoxicity: Potentially harmful to aquatic life due to hormone-like activity, avoid environmental release
Persistence and Degradability: Limited biodegradation, may persist in aquatic environments
Bioaccumulation Potential: Possible bioaccumulation in plant and animal tissues
Mobility in Soil: Low water solubility reduces leaching, may bind to organic matter
Other Adverse Effects: Disruption to aquatic endocrine systems, avoid introduction to watercourses
Waste Disposal Method: Dispose as hazardous pharmaceutical waste in accordance with local, state, and federal regulations, do not discharge into drains or water systems, incinerate in licensed facility if possible
Contaminated Packaging: Empty containers retain product residues, manage as hazardous waste
Precautions: Collect, label, and store waste securely, reduce generation by accurate measurement and careful handling practices
UN Number: Not classified for transport under standard UN shipping regulations
Proper Shipping Name: Pharmaceutical goods, not otherwise specified
Transport Hazard Class: Not regulated
Packing Group: Not regulated
Environmental Hazards During Transport: Avoid releases, label as environmentally hazardous if shipping large quantities
Special Precautions for User: Store and transport in sealed containers, keep upright and away from food and feed, ensure compliance with any additional national or airline requirements
Labeling Requirements: Comply with local and international safety labeling, include hazard statements and precautionary measures
Status Under Various Regulations: Schedule III controlled substance in US, tightly regulated in many countries, report use and possession as required
Workplace Exposure Controls: Maintain safety training records, provide clear access to safety information sheets and protocols
Other Regulations: Follow OSHA Laboratory Standard, handle as hazardous drug in clinical environments, ensure compliance with REACH (EU), WHMIS (Canada), or local equivalents
Restrictions: Prescribed use only, restricted sales and distribution, possession without appropriate authorization may be illegal
Providing high-quality chemical products and logistics solutions for global trade partners.
